Arrow VT1231 Manual de Instruções descarregar pdf (Página 32)

● Parts Needed For ●

Roof Panels 12x10

Step 21

STEP

BW32

●●

● 7828 Middle Roof Panel (2)

1Position middle roof panel over-

lapping rib of left corner roof panel.

Fasten overlap at center of roof panel

rib using a bolt and nut. Fasten to roof

beams as before using screws.

2Cut the weather stripping tape

into 4 strips, each strip being about 2"

(5cm) long.

3Cover the joint at the peak with

weather stripping tape. Unroll the tape

and press it down over the opening at

the ridge as you install each roof

panel. Do not cut the tape at this time.

4Install a middle roof panel on the

left side of building. At the top roof

beam end of panels, fasten 1st roof

panel rib overlaps with a bolt and nut.

Press 2 strips over the bolt heads.

Save the other 2 strips for the next

overlap. Remember, the crimped rib

is always overlapped by wide rib of

adjacent panel.

STEP

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 42 43

Sem comentários

Arrow VT1231 Manual de Instruções Página 32